KEY BENEFITS

• Eliminates gutter cleaning forever!

• Filters out all debris from your gutter!

• First Stage filter in rain harvesting systems

• Barley visible from the ground!

• No rain gutter clogs ever!

• Fits on any gutter and roof type!

• Filters over 150 inches of hourly rain!
  
  
  

Construction:
Gutterglove consists of two components, a perforated aluminum channel and 316 stainless steel mesh. section.  It installs on any existing gutter.  It was designed that way!  Gutterglove's specifications were designed so that is simply slips under the roof shingles and fits snuggly to the front lip of your gutter.  Gutterglove should be installed at the same pitch as the roof to get the best performance of debris shedding off.


Aluminum Channel Frame:
Our Extruded aluminum support frame is anodized to further protect itself from the environment.  The anodizing process converts the aluminum surface into an extremely hard, durable, corrosion resistant, long-lasting aluminum oxide finish.  Anodizing also responds favorably to current governmental regulations because it is one of the most environmentally friendly industrial processes.  Since the process is a reinforcement of a naturally occurring oxide process, it is non-hazardous and produces no harmful or dangerous by products.  Anodized aluminum is used around the world as highly durable exteriors in commercial buildings such as one of the world's tallest buildings, the Sears Tower. 


Stainless Steel Mesh:
The super-strong type 316 stainless steel mesh allows more than 150 inches of hourly rainfall to filter through to your gutter.  This steel is more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium nickel austenitic stainless steels. 


Rain and Winds Splash off Debris:
Research shows that in most cases the pounding of the rain and wind, and the slope of the roof naturally "splash off" most of the sand and Debris. 




__________________________________________________________________________________

Ice Breaker is the worlds first true HEATED gutter guard

Icebreaker conductively RADIATES HEAT throughout itself and the gutter to melt icicles, ice dams and snow loads with the use of a SINGLE HEAT CABLE!

A) Melts icicles, snow and ice dams in and on the gutter

B) Self-regulating heat cable

C) Heat radiates throughout the aluminum support frame.

D) Heat thermally radiates downward creating a warm micro-climate to melt ice at the bottom of the gutter.

_________________________________________________________________________________

Rain Harvesting System

1.) Rain Catchment Area: The roof is used as a collection point where all the rain drops land and congegate together.  They immediately slide toward the gutter.
2.) Gutterglove Filter: The Gutterglove filter system keeps all the leaves, pine needles and roof sand grit out of the gutter and rainwater storage tank.
3.) Catchment Tube: Made from pvc pipe, this tube is connected to the bottom of the gutter and channels the rainwater to the roof washer.
4.) Roof Washer: This tube collects the first several gallons of dirtier rainwater from the beginning of each rain event and diverts it away from the rain tank.
5.) Water Intake: Rainwater enters tank from here.
6.) Rainwater Collection Tank: Water is stored here.
7.) Air Gap:  Allows for the exchange of air in and out of the rain tank so the tank doesn't collapse when the rainwater is used up.
8.) Overflow: When the rain tank fills up with rainwater, the excess rainwater will exit here.
9.) Pump: pumps rainwater out for outdoor water needs. 
10.) Water Level Indicator
11.) Fire Hydrant: large harvesting systems can have this for helping put out fires.

>Back to gutter protection systems